Safe online shopping!
Since 1989!
Click on logo to go to home page.
Reverse Osmosis Drinking Water System
PureEarth has been offering a complete line of hi-tech home water filters, purifiers, and softeners since 1989 - on the internet since 1996. We're an established, profitable, debt-free company - not an upstart "dot com / dot go" company!
We purchase top-quality NSF® certified components from respected industry-leading suppliers to assemble our reverse osmosis systems. This allows us to sell our reverse osmosis systems at down-to-earth factory-direct prices - UP TO 40% OFF LIST PRICE. There are no "hidden" costs - shipping is FREE on orders of $50 or more (anywhere in continental U.S.), only $6.95 on orders less than $50! For orders to Alaska and Hawaii, call for quote.!
Certain areas of the country have a high mineral content in their water.
When the concentration of these dissolved solids get above 250 mg/l (ppm),
the water can take on a bitter taste. Since ordinary filters do not remove
minerals from the water, a Reverse Osmosis system is recommended. Reverse
Osmosis is a process of forcing tap water through a semi-permeable membrane,
leaving dissolved solids and other impurities behind. These impurities are
rinsed away, resulting in clean, clear, great tasting water. This same
process is used by many of the bottled water companies. Anything made with reverse osmosis
water tastes better: coffee, juices, soups, pasta. Ice cubes are clearer and harder and
free of "funny taste" (ask for a free ice maker tee fitting when ordering). If you are unsure of
your water's mineral content (hardness), call your water department, or call us
for a free in-home test strip.
WHY SUCH A HIGH PRODUCTION MEMBRANE? While most reverse osmosis systems use a 10 or 12 gallon per day membrane, we use a 75 or 150 gallon per day. Why? While 12 gallons per day sounds like plenty of water, it's the production time you need to consider: it takes the 12 gallon per day (gpd) membrane over 2 hours to make one gallon of water, while it takes our 75 gpd membrane about 20 minutes to make one gallon and the 150 gpd membrane only 10 minutes (@ 65 psi and 77º F)! Most storage tanks only hold about 2 gallons of water, so you can see that during heavy use times (company) you could be out of water for some time with a slow membrane!
Reverse osmosis systems are not created equal - here’s what makes our 4-stage system a great choice:
* - Total tank volume, based on industry-standard rating. Actual capacity of any bladder-type storage tank is less than the rated volume. At 60 psi, it is 60% of total; at 50 psi, it is 50% of total; at 40 psi, it is 40% of total.
Our Reverse Osmosis System installs easily under the sink (see instruction link below). They connect to the cold water line with an "EZ faucet connector" and dispense water through an attractive LEAD-FREE* solid brass faucet. Quick-connect fittings make for fast, easy installation.
The STANDARD SERIES faucet (pictured on the left) is chrome with white plastic tip and handle.
It is 9" tall and has a swivel spout with a reach of 5.5". Though it only
requires a 1/2" diameter hole for installation, it includes a decorative cover to
accomodate holes up to 1.5".
The PREMIUM SERIES upscale designer faucet (pictured in the center) is also available
for only $10 more than the standard. This elegant lead-free solid brass faucet features a smooth
quarter turn handle with a ceramic seat for a lifetime of service. In addition to the chrome with brass tip and handle accent (see picture above, right), it comes in all chrome,
all brushed nickel (stainless steel look), all white, all almond, all bisque, all black, all red, and all polished brass. Click HERE for picture. It is
recommended that you choose the faucet to match the color scheme of your main faucet. Select color choice on order screen.
It is 9" tall and has a swivel spout with a reach of 5.5".
Though it only requires a 1/2" diameter hole for installation, it includes a
decorative cover to accomodate holes up to 1.5".
A new EURO SERIES designer faucet (pictured on RIGHT) is also available for only $25 more than the standard. This
European-design ultra-elegant lead-free solid brass faucet features a smooth
quarter turn handle with a ceramic seat for a lifetime of service. It will complement any high-end kitchen! Click HERE for a close-up picture. In
addition to the all chrome (pictured), it is also available
in brushed satin nickel and all white. Select color choice on order screen. It is 10.75" tall and has a swivel spout with a reach of 4.5".
Though it only requires a 1/2" diameter hole for installation, it includes a
decorative cover to accomodate holes up to 1.5".
* - Complies with NSF-61 and California Prop. 65 standards
If you are looking for even higher-end faucet for your custom kitchen, check out the Waterstone Faucets web page. After selecting your choice, call us with the part number and we will get you a quote. These faucets are drop shipped from Waterstone.
Reverse osmosis system space requirements: Main unit is 18" tall x 14" wide x 6" deep, storage tank is 9" diameter X 20" tall (a 3' tube connects them - they can be on opposite sides under your cabinet). 5 year warranty on hardware, 2 years prorated on membrane.
COMPARE FEATURES! COMPARE PRICES! You will find our reverse osmosis system to be an outstanding value!
Click here for reverse osmosis membrane test data.
End-of-Summer
Special:$50 Off the RO-75 or RO-150 Premium Series PLUS Receive
a FREE TDS hand-held meter to monitor membrane performance (a $49 value)!Ends September 30th, 2005.
Check
out the NEW Merlin 720 GPD ON-DEMAND REVERSE OSMOSIS - 0.5 GPM WITH NO STORAGE TANK!
75 Gallon Per Day Systems (1 gal. in 20 min. @ 96% TDS reduction)
RO-75 STANDARD SERIES REVERSE OSMOSIS SYSTEM (with Standard Faucet):
$299.00 with FREE SHIPPING (in U.S.)!
30 day money-back guarantee!
RO-75 PREMIUM SERIES REVERSE OSMOSIS SYSTEM (with Upscale Designer Faucet - 6 color choices):
$309.00 $259.00 with FREE SHIPPING (in U.S.)!
30 day money-back guarantee! Select color choice on order page.
RO-75 EURO SERIES REVERSE OSMOSIS SYSTEM (with Euro Designer Faucet - 2 color choices):
$324.00, with FREE SHIPPING (in U.S.)! 30 day money-back guarantee! Select color choice on order page.
150 Gallon Per
Day Systems (1 gal. in 10 min. @ 93% TDS reduction)
RO-150 STANDARD SERIES REVERSE OSMOSIS SYSTEM (with Standard Faucet):
$329.00. with FREE SHIPPING (in U.S.)!
30 day money-back guarantee!
RO-150 PREMIUM SERIES REVERSE OSMOSIS SYSTEM (with Upscale Designer Faucet - 6 color choices):
$339.00 $289.00 with FREE SHIPPING (in U.S.)!
30 day money-back guarantee! Select color choice on order page.
RO-150 EURO SERIES REVERSE OSMOSIS SYSTEM (with Euro Designer Faucet - 2 color choices):
$354.00, with FREE SHIPPING (in U.S.)!
30 day money-back guarantee! Select color choice on order page.
SUPER-CHARGE YOUR REVERSE OSMOSIS SYSTEM!
Add the
Aquatec Permeate Pump to your reverse osmosis system for increased performance. This non-electric device improves
water quality, reduces waste water, fills tank faster and more completely, and provides greater tank pressure. Click
HERE
for more details. Includes specially matched auto-shut-off valve that shuts tank off at 90% of line pressure to replace standard 65% ASO valve. Order it with our reverse osmosis system above and we will install it on your unit!
Regularly $99.00,
now on special for only $69.00!
NEW!!
TURN YOUR REVERSE OSMOSIS SYSTEM INTO A ZERO-WASTE SYSTEM!
$249.00 with FREE SHIPPING (in contiguous U.S.)!
While an reverse osmosis system will produce water at 40 PSI, 60 PSI or above provides optimum water quality and production speed. The 6800 Aquatec Booster Pump is available to increase inlet pressure (includes tank shut-off valve).
Only $129.00.
Optional
Aquatec Delivery Pump is available for remote installations (such as basements).
Only $129.00.
NOTE: Water hardness of over 10 grains per gallon (170 mg/l) can cause the membrane to fail prematurely - you should consider a water softener as a pretreatment if your water is this hard. Click HERE for more information.
REPLACEMENT CARTRIDGES FOR THE RO-75 and RO-150 (AND RO-50)
Replacement filter set (change every year) includes:
SF1 sediment prefilter, CB-10 -KDF carbon block prefilter,
IL-GAC carbon post filter. RO-FRS - $39.00 (save $10 over
ordering individual components).
Replacement filters: Sediment (at least every year) - SF1 - $5.00.
Carbon-block w/KDF prefilter (every year) - CB-10-KDF - $25.00.
Carbon postfilter (every year) - IL-GAC - $19.00.
75 gallon per day
encapsulated membrane
module (housing and membrane in one, with integrated flow restrictor and
check valve). You can
upgrade
your current system with this module! (3-year approx. life)
TFC-75-EB $69
High Production
150 gallon per day
encapsulated membrane module (housing and membrane in, one
with integrated flow restrictor and check valve). You can
upgrade
your current system with this module! (3-year approx. life)
TFC-150-EB $89
Membrane element for earlier PureEarth and other standard RO's -
TFC-75 (and TFC-50)
$59.00
Commercial
reverse osmosis systems are available - call us for details!
Notice: consumer is responsible for following any state and/or local regulations and plumbing codes pertinent to the purchase, installation and operation of our products.
OR, E-MAIL us!
